Series DuraStyle Whirltubs #760298

Whirltub #760298

Design by Matteo Thun & Antonio Rodriguez

Whirltub, 760298000AS0000 Air-System

Top Downloads

rectangle, built-in or for panel, with two backrest slopes, with support frame and waste and overflow, sanitary acrylic

Dimension

Color

Data sheet

Variants

Air-System

1800 x 800 mm

34.000 kg

760298000AS0000

Suitable setting

	Surcharge			791206
	for waste and overflow Quadroval, with water inlet, *
	Surcharge			791227
	for waste and overflow Quadroval, with base inlet, chrome, **

Suitable setting for Combi-System E

	Heating			791882
	for whirltubs with Combi-System E
	UV Hygiene Management			791884
	for whirltubs with Combi-System E
	LED coloured light (replaces LED white light)			791890
	for whirltubs with Combi-System E

Suitable setting for Jet-System

	LED coloured light			791850
	for whirltubs with Jet-System, for whirltubs with Jet-System or Combi-System P

Suitable setting for Combi-System L

	Heating			791883
	for whirltubs with Combi-System L
	UV Hygiene Management			791887
	for whirltubs with Combi-System L
	LED coloured light (replaces LED white light)			791892
	for whirltubs with Combi-System L

Suitable panels

	Dimension	Weight	Order number
Furniture panel	1790 mm		DS8939
for niche, for # 7X0298 (1800 x 800 mm), for # 700306 (1800 x 800 mm)
Furniture panel	1790 x 790 mm		DS8778
for back-to-wall version, for # 7X0298 (1800 x 800 mm), for # 700306 (1800 x 800 mm)
Furniture panel	1790 x 790 mm		DS8783
for corner right, for # 7X0298 (1800 x 800 mm), for # 700306 (1800 x 800 mm)
Furniture panel	1790 x 790 mm		DS8788
for corner left, for # 7X0298 (1800 x 800 mm), for # 700306 (1800 x 800 mm)

Suitable products

Downloads

File filter

Revit RFA

Care instruction

Feet positioning whirltubs

Mounting instruction

Pre-installation Data Sheet

Technical drawings (TIFF)

CAD drawings 2D (DWG)

CAD drawings 2D (DXF)

CAD drawings 3D (DWG)

CAD drawings 3D (DXF)

CAD drawings 3D (IGS)

CAD drawings 3D (STP)

Product images (TIFF)

Operating manual

Documents (PDF)

Hint:

Remarks: Dimensions shown in downloads shall not be used for cut-out templates. Upon request cut-out templates are available from Duravit. All drawings contain the necessary measurements which are subject to standard tolerances. They are stated in mm, are drawn on a scale of 1:20 and are non-binding. Exact measurements, in particular for customised installation scenarios, can only be taken from the finished ceramic piece.